|
How to Configure
the ZoneAlarm Firewall to Allow File Sharing (part 3)
|
| |
|
 Step
5: Type the first IP Address of your network (the starting range)
in the top 'IP Address' field.
|
| Step
6: Type the last IP Address of your network (the ending range)
in the bottom 'IP Address' field. |
| Step
7: Type a descriptive name for your network range in the 'Description'
field. |
| Step
8: With the left mouse button, click on the 'OK' button. |
 |
| |
| The added IP Range appears in the
Trusted Zone. |
|
Step
9: With the left mouse button, click on the 'Close' button
to close ZoneAlarm.
|
 |
| |
| Step
10: Access your shared folders / files. |
| |
Note:
If you are still having problems accessing your shares, then temporarily
shut down the firewall
to test whether is it the cause of the problem.
You cannot disable or turn off the ZoneAlarm Firewall. You
have to completely shut it down.
Make sure the firewall(s) on the other computer(s)
are also properly configured.
Don't forget to restart the firewall after troubleshooting the problem. |
| |
|
Special note: If you are still
having problems accessing your shared folders / files, and your
firewall is off, then walkthough the tutorial
below that applies to your setup (A nominal risk-free
charge of $1.00 per fee-based tutorial is required to view the complete
tutorial.):
|
| |
|
|
| |
| EasyLI Done!™ |
| |
Connect your computers together to backup or share your files between them.
It's easy, it's fast, and best of all, it's guaranteed to work or your money is refunded back to you! No corporate red-tape, no if, ands or buts. If the tutorial does not work to your satisfaction, just forward me a copy of your PayPal receipt, and within a day or two your refund will be issued. Your total satisfaction is what counts to me! So, go ahead and try the tutorial risk-free. |
| |
|
|
|
|
|
|
